Tri-pod models
Tel: 01256 410038 Mobile: 07970 454 226
 
Specifications Hull & Deck Hoppers Night lights Bait capacity Charging socket Charging LED Radio system Gallery / Pics
                 
Accessories Shuttle Smartcast HOME Video Contact Order form

Shuttle
Click to enlargeClick to enlargeClick to enlargeClick to enlarge

 
   
Picture of an assembled SH01 kit

You can tow the Shuttle behind the Stealth by means of a piece of fishing line or similar about 3 feet long, one end gets attached to the towing eye on the Shuttle the other make into a loop, fit this onto one of the rear hopper bolts so it is between the hopper and the deck.
This will make the Shuttle tow to one side away from the turbulence of the prop and allow your rig to be put in the opposite hopper keeping your line and the tow line for the Shuttle apart.

     
This is an easy D.I.Y. kit.
To complete you will need a Smartcast float (orange NOT green). The kit comes with instruction including some photos.
Tools need include a 8mm drill, sealant and a small coping saw.
You do not need to dismantle the Smartcast float unit and it can be replaced at a later date if required. You can use the stainless steel bolts and dome nuts as a securing point for attaching to a bait boat or you can simply tow the unit.
Range is up to about 80m when used with a standard RF10 or RF15 Smartcast screen unit.
if used with a Smartcast screen modified with our SC01 kit (see under Smartcast above) range up to about 160m
SH01 kit
£35.99

     
Using this kit will void any warrantee on the float unit.